Specifying Settings For Limiting User Authentication To Only Scan Functions (Mode 479) - Konica Minolta bizhub 362 User Manual

10
Specifying settings for limiting user authentication to only Scan
functions (mode 479)
Specify whether or not user authentication is performed only when the
[Fax/Scan] or [Extra Scan] key is pressed.
Factory settings
Bit
Setting
Specifying the setting
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7, 6, 5
4, 3, 2, 1, 0
Reminder
Do not specify settings for mode 479 other than those described in
"Specifying the setting".
!
Detail
If user authentication is limited to Scan functions, touch [Account/User
Auth.] in the Administrator Management 1 screen, and then select
"External Server" as the user authentication method. For details on the
external server authentication settings, refer to the User manual [Copy
Operations].
10-60
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
---------------------- 000
Specifies whether or 11001
not to limit authenti-
00000
cation on Fax and
Scan functions.
Specifying management settings
Description
*Do not change these bits
when specifying settings
for this function.
Limited
Not limited
bizhub 362/282/222
Page Refer-
ence
----------
----------