12
Tone volume parameters
In the User Management screen, sound levels can be specified for the
"Confirmation Beep", "Alarm Volume", "Line Monitor Sound", and "Job
Complete Beep" parameters.
Parameter
Confirmation Beep
Alarm Volume
Line Monitor Sound
Job Complete Beep
Note
The "Line Monitor Sound" parameter appears only if the optional fax kit
is installed.
Panel Cleaning
Parameter
Panel Cleaning
Note
To exit the Panel Cleaning screen, press the [Reset] key.
Toner Supply
Parameter
Toner Supply
12-24
Description
Specify the volume (between 0 and 5) of the
tone produced when a key is pressed.
Specify the volume (between 0 and 5) of the
tone produced when an alarm is sounded.
Specify the volume (between 0 and 5) of the
sound produced when a transmission is be-
ing monitored.
Specify the volume (between 0 and 5) of the
tone produced when a job is completed.
Description
A screen is displayed so the control panel can be cleaned.
Description
Select this parameter if the copies have become faint, for example, im-
mediately after the toner bottle is replaced or after copying a large
quantity of documents with large printed areas.
Utility mode
Default setting
3
3
3
3
bizhub 362/282/222