Specifying Settings When Copying Is Finished Using The Adf (Mode 429) - Konica Minolta bizhub 362 User Manual

12

Specifying settings when copying is finished using the ADF (mode 429)

Specify whether or not all settings are reset when copying is finished using
the ADF.
Settings at time of purchase
Bit
Setting
Specifying the setting
The grayed out cells are the settings at the time of purchase.
Bit
7, 6
5
4, 3, 2, 1, 0
12-60
0 0 0 0 0 1 0 0 (HEX: 04)
Description Setting
---------------------- 00
Specify whether or 0
not all settings in the
Basics screen are re-
set when copying is
1
finished using the
ADF.
---------------------- 00100
7 6 5 4 3 2 1 0
Description
*Do not change these
bits when specifying
settings for this func-
tion.
Automatic panel reset
operation is not per-
formed.
Automatic panel reset
operation is per-
formed.
*Do not change these
bits when specifying
settings for this func-
tion.
bizhub 362/282/222
Utility mode