Konica Minolta bizhub 362 User Manual page 383

Utility mode
5
Type in the password (up to 8
characters long), and then touch
[Enter].
– Touch [New Password], type the
new password into the screen
that appeared, and then touch
[Enter].
– Touch [Confirm New Password],
type the new password again into
the screen that appeared, and then touch [Enter].
– To change the password, touch [Current Password], type the
current password into the screen that appeared, and then touch
[Enter].
– To cancel changes to the settings, touch [Cancel].
– For details on typing in text, refer to "Entering text" on page 13-3.
The Account Registr. screen appears again.
6
Touch [Max. Print Limit].
The Max. Print Limit screen appears.
7
Touch
cursor to the value to be changed,
and then use the keypad to specify
the maximum number of prints
allowed.
– The maximum number of prints
allowed can be set between 0
and 999,999.
– If "0" is specified, there is no limit
on the number of prints allowed.
– To cancel changes to the settings, touch [Cancel].
8
Touch [Enter], and then touch [Enter] in the next two screens that
appear.
– To exit the Account/Authentication screen, touch [Enter] in each
screen until the Basics screen appears.
The screen for selecting an account number appears again.
The new account is registered.
Note
The account name appears on the button for the registered account
number.
bizhub 362/282/222
and to move the
12
12-37