To Set The "Key Speed Settings" Function - Konica Minolta bizhub 362 User Manual

Additional copy operations

To set the "Key Speed Settings" function

It is possible to specify the length of time until the value begins to change
after a touch panel button is held down and the length of time for the value
to change to the next number.
0 The factory default setting for "Time to Start" is 0.3 second, and the
factory default setting for "Interval" is 0.1 second.
1
Display the Accessibility Settings screen. (For details, refer to
page 5-15.)
2
Touch [Key Speed Settings].
The Key Speed Settings screen appears.
3
Touch
starting time and the interval for the
key repeat feature.
The starting time and the interval for
the key repeat feature specify the
speed at which a value changes
when
change a setting.
? How are the specified time settings checked?
% Touch [CHECK] to check the specified key repeat settings.
4
Touch [Enter].
The Accessibility Settings screen appears again.
bizhub 362/282/222
and to specify the
or is held down to
5
Interval
Starting time
5-17