Konica Minolta bizhub 362 User Manual page 79

Before making copies
No. Part name
7 [Reset] key
8 [Interrupt] key
9 [Power] (auxiliary power) key
10 [Stop] key
11 [Start] key
12 Main Power indicator
13 [Proof Copy] key
14 Keypad
15 [C] (clear) key
16 [Mode Check] key
17 [Utility/Counter] key
18 [Mode Memory] key
19 Contrast dial
20 [Enlarge Display] key
21 [Accessibility] key
bizhub 362/282/222
Description
Press to clear all settings (except programmed
settings) entered in the control panel and touch
panel.
Press to enter Interrupt mode. While the ma-
chine is in Interrupt mode, the indicator on the
[Interrupt] key lights up in green and the mes-
sage "Now in Interrupt mode." appears on the
touch panel. To cancel Interrupt mode, press
the [Interrupt] key again.
Press to turn on and off machine operations, for
example, for copying, printing or scanning.
When turned off, the machine enters a state
where it conserves energy.
Press the [Stop] key during copying to stop the
copy operation.
Press to start copying. When this machine is
ready to begin copying, the indicator on the
[Start] key lights up in green. If the indicator on
the [Start] key lights up in orange, copying can-
not begin.
Press to restart a stopped job. For details on
jobs, refer to "Job List screens" on page 5-22
Lights up in green when the machine is turned
on with the main power switch
Press to print a single proof copy to be checked
before printing a large number of copies. (See
page 5-6)
Use to type in the number of copies to be pro-
duced.
Use to type in the zoom ratio.
Use to type in the various settings.
Press to erase a value (such as the number of
copies, a zoom ratio, or a size) entered using the
keypad.
Press to display screens showing the specified
settings.
Press to display the Utility/Counter screen.
Press to register the desired copy settings as a
program or to recall a registered copy program.
(See page 5-9)
Use to adjust the contrast of the touch panel.
Press to enter Enlarge Display mode.
Press to display the screen for specifying user
accessibility functions.
3
3-17