Automatically Selecting The Paper Size ("Auto Paper Select" Setting) - Konica Minolta bizhub 362 User Manual

4

Automatically selecting the paper size ("Auto Paper Select" setting)

The size of the loaded document is detected, and copies are produced using
paper of the same size.
If the "×1.0" Zoom setting was specified, paper of the same size as the
document is selected.
If the zoom ratio was increased or decreased, a paper size that corresponds
to the specified zoom ratio is automatically selected.
1
In the Basics screen, touch [Paper].
The Paper screen appears.
2
Touch [Auto Paper Select].
!
Detail
If the document size cannot be detected, remove the document, and then
load it again.
If a document with an irregular size is loaded, specify the paper size
manually. (Refer to "Manually selecting the desired paper size" on
page 4-27.)
4-26
Basic copy operation
bizhub 362/282/222