9
–
If a button is pressed where no image is stored, the size of the
stored image appears on the button to indicate that an image has
been stored.
–
To store the image with a number where an image is already stored,
delete the image, touch [Set], and then touch the button for the
number.
–
To delete the image, touch [Delete], and then touch the button for
the number stored with the image.
5
Select the size of the area to be
scanned.
–
To cancel changes to the
settings, touch [Cancel].
–
Touch [Auto Detect] to
automatically detect the size of
the area to be scanned in the
document image.
–
Touch [Custom Size] to display
the Custom Size screen. Touch
[X] or [Y], use the keypad to
specify the size, and then touch
[Enter].
–
A value outside the allowable
range cannot be entered.
–
To change the entered value,
press the [C] (clear) key, and then
enter the correct value.
6
Touch [Enter].
9-28
No program registered
Application functions
Program registered
bizhub 362/282/222