Displaying The Administrator Management Screen; To Display The Administrator Management Screen - Konica Minolta bizhub 362 User Manual

Utility mode
12.4

Displaying the Administrator Management screen

In order to change Administrator Management settings, display the
Administrator Management screen.
Reminder
Be sure to keep the administrator access code in a safe place. If the
administrator access code is lost while "Enhance Security" is set to "ON",
Administrator Management settings can no longer be specified. In this
case, the administrator access code cannot be specified again. For
details, contact your technical representative.

To display the Administrator Management screen

1
Press the [Utility/Counter] key.
The Utility/Counter screen appears.
2
Touch [Admin. Management].
The Administrator Code screen
appears.
3
Use the keypad to type in the 8-digit
administrator access code, and then
touch [Enter].
– To change the entered value,
press the [C] (clear) key, and then
enter the correct value.
– To cancel changes to the
settings, touch [Cancel].
The Administrator Management
screen appears.
bizhub 362/282/222
12
12-25