Konica Minolta bizhub 362 User Manual page 128

4
3
Specify the desired copy settings.
– The factory default settings for
this machine are listed below.
Paper: Auto Paper
Zoom: e1.000 (Full size)
Simplex/Duplex: 1 % 1
Quality Density: Text
– For details on specifying
document settings, refer to
"Specifying document settings" on page 4-17.
– For details on selecting a paper source setting, refer to "Selecting
a Paper setting" on page 4-25.
– For details on specifying a Zoom setting, refer to "Specifying a
Zoom setting" on page 4-28.
– For details on selecting a Simplex/Duplex setting, refer to
"Selecting single-/double-sided settings for originals and copies"
on page 4-40.
– For details on selecting the quality of the document and the copy
density, refer to "Specifying document quality/density settings" on
page 4-43.
– For details on specifying combined copy settings, refer to
"Selecting a Combine Originals setting" on page 4-46.
– For details on specifying Finishing settings, refer to "Selecting
finishing for copies" on page 4-50.
– For details on selecting the binding setting, refer to "Creating
booklet copies ("Booklet" function)" on page 9-22.
– For details on specifying settings for the Application functions, refer
to "Application functions" on page 9-3.
4
Using the keypad, type in the desired
number of copies.
– If the number of copies was
incorrectly entered, press the [C]
(clear) key in the keypad, and
then specify the correct number
of copies.
4-4
Basic copy operation
bizhub 362/282/222