To Delete A Job - Konica Minolta bizhub 362 User Manual

Additional copy operations

To delete a job

A job being performed or a job waiting to be performed can be deleted.
1
Touch [Job List].
The Job List screen appears.
2
Select the job that you wish to delete.
– If the job that you wish to delete
is not displayed, touch
displayed.
The screen for deleting the selected
job appears.
3
Check the information that is
displayed, and then touch [Delete].
The selected job is deleted.
4
Touch [OK].
The Job List screen appears again.
!
Detail
A job can also be deleted after the [Stop] key is pressed. For details, refer
to "Stopping/deleting a job" on page 4-63.
bizhub 362/282/222
until the desired job is
and
5
5-25