Basic copy operation
To bind copies with staples
1
In the Basics screen, touch
[Finishing].
The Finishing screen appears.
2
Touch either [Corner Staple] or [2
Staples].
–
If "Corner Staple" is selected, the
copies are bound together with a
staple in the upper-left corner.
–
If "2 Staples" is selected,
[Position Setting] appears in the
screen. To select the binding
position, continue with step 3.
–
If a staple setting is selected, the [Sort] setting is automatically
selected.
–
To cancel the staple setting, touch [Corner Staple] or [2 Staples]
again to deselect it.
3
Touch [Position Setting], and then
select the desired position.
–
Touch [Auto] to automatically
determine the binding position
according to the orientation of
the loaded document.
4
Touch [Enter].
The Finishing screen appears again.
bizhub 362/282/222
4
4-57