Adjusting The Copy Density (Density Settings) - Konica Minolta bizhub 362 User Manual

Basic copy operation

Adjusting the copy density (Density settings)

0 The default setting is the middle of the five levels. When the "Auto"
setting is selected, the "Std." Density setting is set.
0 The default Density setting and the density selected when the "Auto"
setting is selected can be changed from the Utility mode. For details,
refer to "Default Copy Output Levels" on page 12-17.
1
In the Basics screen, touch
[Quality/Density].
The Quality/Density screen appears.
2
Select the desired Density setting.
– Each time [Light] or [Dark] is
touched, the density is lightened
or darkened by one level.
– Touch [Auto] to automatically
adjust the density according to
the document that is loaded.
bizhub 362/282/222
4
4-45