Scanning The Next Document During Printing (Reserving A Copy Job); To Reserve A Copy Job - Konica Minolta bizhub 362 User Manual

4
4.11 Scanning the next document during printing
(reserving a copy job)
The settings for the next copy job can be specified and the document can be
scanned while a copy operation is being performed so that it can be printed
once the current copy operation is finished.

To reserve a copy job

0 A copy job can be reserved only if optional hard disk is installed.
0 Up to 5 copy jobs, including the current copy job, can be queued.
0 A copy job can be reserved after scanning of the loaded document is
finished.
0 A copy job cannot be reserved while a document is being scanned.
0 For details on positioning the document, refer to "Feeding the document"
on page 4-9.
0 To stop the job being printed, press the [Stop] key. For details, refer to
"Stopping/deleting a job" on page 4-63. In addition, the job can be
deleted from the Job List screen. For details, refer to "To delete a job" on
page 5-25.
1
Press the [Start] key to begin
scanning and printing the current
copy job.
A message appears, indicating that
the document is being scanned.
2
When the message "Ready to accept
another job." appears, copy settings
can be specified for the next copy
job.
3
Press the [Start] key.
4
After the current copy job is finished, the next copy job begins.
4-62
Basic copy operation
bizhub 362/282/222