To Set The "Notification Screen" Function - Konica Minolta bizhub 362 User Manual

Additional copy operations

To set the "Notification Screen" function

It is possible to specify the length of time that the screen is displayed to
confirm the reception number or job ID after copying is finished.
0 The factory default setting is "3 sec.".
1
Display the Accessibility Settings screen. (For details, refer to
page 5-15.)
2
Touch [Notification Screen].
The Notification Screen screen appears.
3
Select the setting for the desired
length of time that the notification
screen is displayed.
– Touch [3 sec.], [10 sec.] or [60
sec.].
– To display the notification screen
until [Enter] is touched, touch [No
Limit].
4
Touch [Enter].
The Accessibility Settings screen appears again.
bizhub 362/282/222
5
5-19