Konica Minolta bizhub 362 User Manual page 122

3
Reminder
Before loading envelopes, press them down to make sure that all air is
removed, and make sure that the folds of the flaps are firmly pressed,
otherwise the envelopes may become wrinkled or a paper misfeed may
occur.
When loading envelopes, load them with the flap side up, as shown. If the
envelopes are loaded with the flap side down, a paper misfeed may
occur. The flap side of envelopes cannot be printed on.
A maximum of 10 envelopes can be loaded into the bypass tray.
After you have loaded the paper, set the paper type for the bypass tray
in the touch panel.
If the Envelope setting was set, the loaded document is copied upside-
down.
3-60
Flap side
Before making copies
bizhub 362/282/222