Scanning A Document In Separate Batches ("Separate Scan" Setting) - Konica Minolta bizhub 362 User Manual

Basic copy operation

Scanning a document in separate batches ("Separate Scan" setting)

A large document can be divided and continuously scanned in a number of
batches.
A maximum of 80 document pages can be loaded into the ADF at one time.
However, by copying with the "Separate Scan" setting, a document that
exceeds 80 pages can be scanned and treated as a single copy job. In
addition, the scanning location can be switched between the original glass
and the ADF during the scanning operation.
1
In the Application screen, touch
[Separate Scan].
– To cancel the "Separate Scan"
setting, touch [Separate Scan]
again to deselect it.
2
Load the first batch of the document,
and then press the [Start] key.
Scanning begins.
The message "To continue scanning,
replace original and press Start."
appears.
– Load the next batch of the
document, and then press the
[Start] key.
– If the document cannot be loaded into the ADF, place it on the
original glass. For details on the types of documents that can be
loaded into the ADF, refer to "Original documents" on page 8-17.
– Repeat step 2 until all pages of the document have been scanned.
The amount of memory available can be checked beside "Memory
Free" in the lower-right corner of the Basics screen.
bizhub 362/282/222
4
4-13