Basic copy operation
4.5
Selecting a Paper setting
The paper size can be selected automatically according to the document
size or it can be specified manually. Specify the paper size according to the
corresponding procedure, depending on the desired copy settings.
Note
The factory default setting is "Auto Paper Select".
As a factory default, the "Auto Zoom" setting and the "Auto Paper Select"
setting cannot both be selected at the same time. If the "Auto Paper
Select" setting is selected while the "Auto Zoom" setting was selected,
the Zoom setting "×1.0" is selected.
However, the software switch settings can be used to allow the "Auto
Zoom" setting and the "Auto Paper Select" setting to be selected at the
same time. For details on the software switch settings, refer to
"Specifying software switch settings (machine functions)" on
page 12-52.
bizhub 362/282/222
4
4-25