To Delete A User For Machine Authentication - Konica Minolta bizhub 362 User Manual

Utility mode

To delete a user for machine authentication

1
Display the User Authentication screen for machine authentication.
– For details on displaying the User Authentication screen, refer to
"Specifying user authentication settings" on page 12-42.
2
Touch [User Registration].
– To immediately display the
desired user, touch [User
Number], and then use the
keypad to type in the user
number.
A screen for selecting a user number
appears.
3
Select the desired user number.
– Select a tab, and then touch the
button for the desired user
number.
The User Information screen
appears.
4
Touch [Delete User].
– If this machine is being used with
machine authentication settings
specified, [Delete User] does not
appear for users that have been
authenticated.
5
Select [Yes], and then touch [Enter].
– To exit the User Authentication
screen, touch [Enter] in each
screen until the Basics screen
appears.
A screen for selecting a user number
appears again.
bizhub 362/282/222
12
12-51