By-Pass Feed Roller And Friction Pad Replacement - Ricoh A219 Service Manual

PAPER FEED
4.4 BY-PASS FEED ROLLER AND FRICTION PAD
REPLACEMENT
1. Turn off the main switch and unplug the power supply cord.
2. Remove the by-pass feed table.
1) Open the by-pass feed table.
2) Slide out the left shaft [A] and the right shaft of the by-pass feed table,
as shown.
3) Remove the by-pass feed table [B].
3. Remove the screw [C].
4. Slide the feed roller shaft cover [D] to the right, and remove it (1 screw).
5. Remove the paper end sensor cover [E] (1 tab).
6. Remove the sensor ass'y [F] (1 screw and 2 connectors).
NOTE: 1) Be careful not to damage the feeler when removing the sensor
ass'y.
2) When reinstalling the ass'y, ensure that the harness is not
caught on the upper guide.
A219
CÓPIA NÃO CONTROLADA
[B]
[A]
A219R514.wmf
[F]
6-32
CÓPIA NÃO CONTROLADA
[D]
[C]
[E]
A219R515.wmf
SM