Table 2-9 Caller Id Matching Rule - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Caller ID Matching.

The UNIVERGE SV8100 compares the Caller ID and programmed Speed Dial and allows/

denies as indicated below.

The Speed Dial table is searched from the starting number and the first match result is

The maximum number of VRS message channels that can be used simultaneously is 16.

These channels are also shared with the voice mail.

This feature does not work with incoming trunk calls via networking (from another system).

In this case, the refuse/routing program must be programmed in the system that has those

trunks. Routing to the other system's extension is available.

When Program 13-04 is used; it will override the setting in Program 22-02-01: Incoming

Call Trunk Setup.

Program 13-04 will follow Common or Group Speed Dial numbers.

With Version 8000 or higher software, the number of Tone Patterns increased from four to

eight. After setting new system data (Tone Patterns 5 - 8), downgrading to Version 7000 or

lower may cause incoming rings to not function properly.

Caller ID Matching Rule:

The system compares the Caller ID and programmed Speed Dial with these rules below.

The Speed Dial table is searched from the starting number and the first match result is used.

Default Setting

Caller ID – Flexible Ringing

Table 2-9 Caller ID Matching Rule