NEC Univerge SV8100 Features And Specifications Manual page 853

UNIVERGE SV8100
Feature Name
Call Forwarding Busy
Call Forwarding Busy No Answer
Call Forwarding, Off-Premise
Call Forwarding/Do Not Disturb
Override
Call Monitoring
Call Redirect
Call Waiting/Camp-On
Callback
Caller ID
Caller ID Caller Return
Central Office Calls, Answering
Central Office Calls, Placing
Class of Service
Clock/Calendar Display
CO Message Waiting Indication
Code Restriction
Code Restriction Override
Code Restriction, Dial Block
Computer Telephony Integration
Conference Calls
IP Multiline Station (SIP) – ML440/G566/G266 with AP400/AP300
Table 2-46 Supported System Feature List (Continued)
ML440 G566
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No No
Yes Yes
Yes No
Yes Yes
No No
Yes No
G266
Yes
Yes
Yes Can be programmed in 24-09-xx, through feature
code from administrator desk set and from the
handset using dial access codes.
Yes ML440 – Do Not Disturb Override can be performed
using dial access codes or a function key.
G566/G266 – Do Not Disturb Override can be
performed using dial access codes only.
Yes ML440/G566/G266 – Can monitor but cannot use
the microphone toggle feature. The handset will not
be able to Barge-In to the conversation only monitor.
No
Yes ML440 – Call Waiting/Camp-On can be performed
using dial access codes or a function key.
G566/G266 – Call Waiting/Camp-On can be
performed using dial access code only.
No G566/G266 – handsets can receive a Callback but
cannot set one for another phone.
Yes
Yes Function of handset.
Yes
Yes
Yes
Yes Time and Date Display:
– ML440 obtains time and date from SV8100
system.
– G566/G266 time and date is set manually per
handset.
No
Yes
No
Yes ML440 – No confirmation tone is heard on ML440.
G566/G266 – Only non-supervisor dial access code
600 is supported for these handsets. The G566/
G266 cannot enable or disable this feature for
another extension.
No
Issue 13.0
Comments
2 - 819