NEC Univerge SV8100 Features And Specifications Manual page 582

Issue 13.0
To place a conference call:
1. With a call in progress, press CONF.
2. Place second internal or external call.
3. Announce conference.
4. Press CONF again. A 3-party conference is established. When any party hangs up, the
conference still includes the remaining parties.
To adjust ring volume:
While the telephone is not being used, press R/VOL (upper key on left side) repeatedly to select desired
setting display:
Ring Type A High

Ring Type A Low

Ring Type B High

Ring Type B Low

Ring Type C High

Ring Type C Low

Ring Off (Vibration)

To adjust receive volume level:
1. With a call in progress, press R/VOL to decrease volume.
2. Press R/VOL to restore normal volume.
To Mute the microphone:
1. Press the MUTE key (lower key on left side).
Microphone is muted.
2. Press the MUTE key again to activate microphone.
To use the Charging Unit:
1. Place handset and/or spare battery in the charging slots.
2. The Charge 1 LED is on red during and after charging the handset.
3. The Charge 2 LED is on red while charging the spare battery and turns off after charging is
complete.
If the handset is placed in the charger without an installed battery, the Charge 1 LED flashes.

2 - 548
UNIVERGE SV8100
term
D Cordless II Terminal