NEC Univerge SV8100 Features And Specifications Manual page 319

UNIVERGE SV8100
Program
Program Name
Number
20-13-13 Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
21-01-15 System Options for Outgoing
Calls – Outgoing Disable on
Incoming Line (Toll Restriction)
21-01-16 System Options for Outgoing
Calls – Supervise Dial Detection
Timer
21-01-17 System Options for Outgoing
Calls – Restriction Digit in
Outgoing Disable on Incoming
Line
21-02-01 Trunk Group Routing for
Extensions
21-15-01 Individual Trunk Group Routing
for Extensions
24-02-07 System Options for Transfer –
Trunk-to-Trunk Transfer Release
Warning Tone
24-02-10 System Options for Transfer –
Disconnect Trunk to Trunk Timer
Central Office Calls, Placing
Description/Comments
Turn Off or On an extension ability
to use Continued Dialing, which
allows DTMF signal sending while
talking on extension.
Enable/Disable the Outgoing
Disable on Incoming Line feature.
With the Outgoing Disable on
Incoming Line feature, if dial tone
is not detected after the extension
answers an incoming line, the
system determines the call is
unable to complete and releases
the DTMF receiver.
With the Outgoing Disable on
Incoming Line feature, determine
the number of digits (0~9) to be
dialed before the call should be
disconnected.
Assign Program 14-06 routes to
extensions.
Designate the trunk route
accessed when a user dials the
Alternate Trunk Route Access
Code. Refer to Trunk Group
Routing to set up outbound
routing.
Timer starts when a trunk begins
talking with another trunk (for
example: Trunk-to-Trunk Transfer,
outgoing from trunk, Tandem
Trunking). When this time expires,
a warning tone is heard.
Timer starts after the Warning
Tone is heard (24-02-07). When
time expires, the trunk is
disconnected.
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Disable
1 = Enable
(default = 0)
0~64800 (seconds)
(default = 20)
Digits 0~9
(default = 4)
0~100
(0 = No Setting)
(default = 1)
0~100
(0 = No Setting)
(default = 0)
0~64800 (seconds)
(default = 1800)
0~64800 (seconds)
(default = 0)
Issue 13.0
Level
2 3







2 - 285