NEC Univerge SV8100 Features And Specifications Manual page 52

Issue 13.0
Program
Program Name
Number
40-10-01 Voice Announcement Service
Option – VRS Fixed Message
Operation
To enter an Account Code anytime while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. Use this procedure if your system has
Optional Account Codes enabled. You may also use this procedure for incoming calls. This procedure is
not available for single line telephones.
1. Dial .

- OR -
Press your Account Code key (Program 15-07-01 or SC 751: code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and
If Account Codes are hidden, each digit you dial shows

3. Dial .

- OR -
Press your Account Code key (Program 15-07-01 or SC 751: code 50).
To enter a Forced Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting the
system prompt you for your Account Code. You may also use this procedure if your system has Optional
Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed in your
Verified Account Code list.
1. Access trunk for outside call.
Press a line key or dial a code.to access a trunk. Refer to

information.
2. Dial .

- OR -
Press your Account Code key (Program 15-07-01 or SC 751: code 50).
2 - 18
Description/Comments
Enable (1) or Disable (0) the
system ability to play the fixed
VRS messages (such as You have
a message).
).
#
on the telephone display.

Central Office Calls, Placing on page 2-277
Account Code – Forced/Verified/Unverified
UNIVERGE SV8100
Assigned Data
1
0 = Not Used
1 = Used
(default = 0)
Level
2 3

for more