Table 2-48 Feature Support Table For Standard Sip Device - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

The Exclusive Hold Recall Timer is used when an internal call from a 3rd Party SIP

telephone is placed on hold.

With SV8100 Version 9000 (9.00 or higher) software, the system has the ability to receive

DTMF information in SIP INFO messages sent by Standard SIP terminals. This allows the

SIP Terminal to initiate features during a ringing state such as Camp-On and Message

Waiting. SIP terminals must be able to support this feature and have it enabled.

If Program 15-05-49 is set to 1: Allowed any time, SIP INFO is received upon arrival.

If Program 15-05-49 is set to 2: Allowed while RTP is not available, SIP INFO is received

while RTP is not established. An In-band method such as RFC2833 is used once the voice

path is established.

SIP INFO functions independently from other DTMF methods such as RFC2833. This

means SIP terminals should send DTMF information by a single method, otherwise the

system will receive both separately causing double digits.

NAT or NAPT is only supported on the DT700 series phones. NAT or NAPT is not

supported on the ML440, MH240, the Wireless DECT (SIP), or SP310 phones.

With SV8100 Version 9500 (9.5 or higher) software, the SV8100 now supports NAT for

Standard SIP terminals.

Feature Name

Account Code – Forced/Verified/Unverified

Account Code Entry

Alarm Reports

Alphanumeric Display

Analog Communications Interface (ACI)

Ancillary Device Connection

Attendant Call Queuing

Automatic Call Distribution (ACD)

Automatic Release

Automatic Route Selection

Background Music

IP Single Line Telephone (SIP)

Table 2-48 Feature Support Table for Standard SIP Device

Depending on SIP device the account code may have

to be part of the dial string.

Some SIP devices have Alphanumeric Displays and

are backlit. However, the display is not updated with

CPU messages.