NEC Univerge SV8100 Features And Specifications Manual page 430

Issue 13.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
20-09-06 Class of Service Options
(Incoming Call Service) –
Incoming Time Display
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-35 Class of Service Options
(Supplementary Service) – Block
Camp-On
Operation
None
2 - 396
Description/Comments
Turn Off or On an extension user
ability to enable Handsfree
Answerback or Forced Intercom
Ringing for their incoming
Intercom calls.
If this option is set to 1, the
Incoming Call Time is displayed on
the multiline terminal LCD while
the telephone is ringing.
Turn Off or On an extension user
ability to have calls queued if a call
rings the extension when it is busy.
Turn Off or On an extension ability
to receive off-hook signals.
20-09-07 must be set to 0

also for this to be effective.
Allow a busy extension user to
Manually (0) or Automatically (1)
receive off-hook signals.
Turn Off or On an extension user
ability to block callers from dialing
#
to camp-on.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 0 for COS
01~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Data Line Security
Level
2 3


