NEC Univerge SV8100 Features And Specifications Manual page 852

Issue 13.0
Feature Name
Alphanumeric Display
Analog Communications Interface
(ACI)
Ancillary Device Connection
Answer Hold
Answer Key
Applications
Attendant Call Queuing
Automatic Call Distribution (ACD)
Automatic Release
Automatic Route Selection
Background Music
Barge-In
Call Appearance (CAP) Keys
Call Arrival (CAR) Keys
Call Duration Timer
Call Forwarding – Centrex
Call Forwarding with Follow Me
Call Forwarding – Park and Page
Call Forwarding All Calls
Call Forwarding Both Ring
2 - 818
Table 2-46 Supported System Feature List (Continued)
ML440 G566
Yes Yes
No No
No No
No No
No No
No No
No No
Yes No
Yes Yes
Yes Yes
No No
Yes No
Yes No
Yes No
No No
Yes Yes
Yes Yes
No No
Yes Yes
Yes Yes
IP Multiline Station (SIP) – ML440/G566/G266 with AP400/AP300
G266
Yes Time and Date Display:
– ML440 obtains time and date from SV8100
system.
– G566/G266 time and date is obtained from the
DAP controller PC.
Name:
– ML440 obtains display name from network domain.
– G556/G266 name is assigned per handset and
does not use the SV8100 system name.
No
No
No
No
No
No
No
Yes
Yes
No
No ML440 – Can monitor but cannot use the
microphone toggle feature. The handset mute button
is the only way to mute audio from handset during
monitoring.
G566/G266 – Can be barged into but cannot initiate
Barge-In.
No
No
No G566/G266 will show call duration briefly after
hanging up. More detailed call history information is
available on the call history log page.
Yes
Yes Only supported on G566/G266 when connected to
system (In Range).
No
Yes Can be programmed in 24-09-xx, through feature
code from administrator desk set and from the
handset using dial access codes.
Yes Only supported on G566/G266 when connected to
system (In Range).
UNIVERGE SV8100
Comments