Video Support Over Sip Trunks - NEC Univerge SV8100 Features And Specifications Manual

Issue 13.0
Required Component(s)
CD-CP00-US
IPLA/ IPLB
IP Trunk License

Video Support over SIP Trunks

Description
With Version 9000 or higher software, the SV8100 can support video calling over SIP interconnection
trunks. The IP Trunk license (5001), IP Station licenses (5101 Basic, 5102 Soft Phone, 5111 Advanced),
Feature Enhancement license (0033 V4000 Enhanced), V9000 Enhancement license (0038) and SIP
Video license (0040) are required.
Conditions
Calls over SIP Interconnection while in P2P mode cannot be put on hold.

Calls over SIP Interconnection while in P2P mode cannot be transferred, i.e. an internal call

cannot be transferred to a SIP Interconnection trunk.
A video call cannot be changed to a voice call. A voice call cannot be changed to a video

call.
A video caller cannot use CTI/OAI at the same time as the CTI/OAI feature needs P2P to

be set to off.
When the video interconnection using a SIP trunk is configured, other SIP connections,

such as a SIP carrier connection is not supported in the same system.
Video capability in the initial invite message is required for the Video Terminal.

When using an MCU, the SV8100 requires the Carrier Type Setting (Program 10-29-14) to

be set to 0 = Standard.
When using an MCU, the same video capability must be set between the MCU and the

Video SIP Terminal.
Default Settings
This feature is not enabled at default.
2 - 872 IP Trunk – (SIP) Session Initiation Protocol
UNIVERGE SV8100