Automatic Route Selection - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Enhancements

With Version 7000 or higher software:

The Dial Analysis table has expanded from 400 to 800 tables (V7000 Enhancement License (0036)

The SV8100 can recognize each system where the DT700 extension(s) are connected and provide an

Automatic Route Selection COS based on the System (System ID) when using NetLink.

Automatic Route Selection (ARS) provides call routing and call restriction based on the digits a user

dials. ARS gives the system the most cost-effective use of the connected long distance carriers.

ARS is an on-line call routing program that you can customize (like other system options) from a display

telephone. ARS accommodates 800 call routing choices – without a custom-ordered rate structure

database. With ARS, you can modify the system routing choices quickly and easily. This is often

necessary in the telecommunications world of today where the cost structure and service choices

frequently change.

The ARS feature can add or delete digits and route calls according to predetermined levels. When

UNIVERGE SV8100 systems are networked together by Tie Lines or K-CCIS, the networked systems

can be called by a system number and a user extension number, just an extension number, or by using

a trunk access code.

ARS Feature Summary

ARS provides:

Call Routing

ARS can apply up to 24-digit analysis to every number dialed. For programming, ARS provides

separate 8-digit and 24-digit tables. Each table can have up to 250 numbers.

Dialing Translation (Special Dialing Instructions)

ARS can automatically execute stored dialing instructions (called Dial Treatments) when it chooses

a route for a call. The system allows up to 15 Dial Treatments. The Dial Treatments can:

Insert or delete an area code (NPA)

Add digits (such as a dial-up OCC number), pauses and waits to the dialing sequence

Require the user to enter an authorization code when placing a call (refer to Program 44-03)

Automatic Route Selection