NEC Univerge SV8100 Features And Specifications Manual page 210

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Call Forwarding reroutes calls ringing an extension, including calls transferred from another extension.

Call Forwarding can also be split, allowing internal and external calls to forward to different destinations.

The extension user can enable Call Forwarding from their telephone. An extension user can also set the

forwarding for another extension by using Call Forward for any Extension to Destination. To redirect

calls while a user is at another telephone, use Call Forwarding with Follow Me. A periodic VRS

announcement can remind users that their calls are forwarded.

Virtual Extensions can be set to Call Forward. Program 15-02-21 must be set to a 1 to

allow the Virtual Extension to place outgoing calls.

If an extension in a call forward chain has Call Forward with Both Ring, calls do not

continue routing to other extensions in the chain (Version 2500 or lower software).

If an extension in a call forward chain has Call Forward with Follow Me set, calls do not

continue routing to other extensions in the chain.

If the extension has Call Forward-Both Ring set to another extension, it will only continue to

forward if the Both ring location is forwarded (B/NA or NA) to VM and no where else

(Version 3000 or higher software is required).

Call Forwards can be chained allowing calls to forward from one extension to the next. Up

to 32 extensions can be linked in a call forward chain.

Periodic reminder message requires a PZ-VM21 daughter board for Voice Response

System (VRS).

Call Forwarding an extension in a Department Group prevents that extension from

receiving Department Pilot Calls.

Ring Groups do not follow Call Forwarding.

Call Forward Split does not allow for Call Forward with Follow Me.

If Call Forwarding off premise, a trunk access code must be included in the forwarding

Call Forward with Follow Me allows for a single station to set follow me for multiple stations.

When canceling Call Forward with Follow Me, the use must specify the station to cancel or

The telephone must be idle to enable call forwarding with a Programmable Function Key, or

receiving dial tone to enable call forwarding with a service code.

Call Forward for any Extension to Destination cannot be set or canceled from a Virtual

Call Forwarding/Do Not Disturb Override allows for Overriding a Call Forwarding or DND

setting at another extension.

UNIVERGE SV8100

Call Forwarding