NEC Univerge SV8100 Features And Specifications Manual page 618

Issue 13.0
Program
Program Name
Number
20-02-10 System Options for Multiline
Telephones – Time Before
Shifting to Power Saving Mode
20-53-01 Night Mode Group Assignment
for Power Save Group – Night
Mode Service Group Number
20-54-01 Power Supply Mode for Each
Power Save Group – Power
Saving Mode
90-02-02 Programming Password Setup –
Password
Operation
Power Cut Off Mode
To cut the power for Power Save Group 2 during the night time (19:00-6:00):
< Program >
Program 20-53-01: Power Save Group 2 Set 1 for Night mode Service Group Number
Program 20-53-01: Power Save Group 3 Set 1 for Night mode Service Group Number
Program 20-54-01: Power Save Group 2
Night Mode 1: Power Saving Mode 1 (Power Supply)
Night Mode 2: Power Saving Mode 0 (Power cut)
Program 20-54-01: Power Save Group 3
Night Mode 1: Power Save Mode 1 (Power Supply)
Night Mode 2: Power Save Mode 1 (Power cut)
Program 15-27-01:
TEL 101: Power Save Group 2
2 - 584
Description/Comments
System-wide timer that determines
how long a multiline terminal is idle
before shifting into the Power
Saving mode.
Assigns the Night Mode Service
group number into the Power
Save group.
Assign the Power Saving mode in
each Power Saving group and
Night mode.
Configure the administrator
accounts that are used when
Power cut to the Power Save
group.
UNIVERGE SV8100
Assigned Data
1
0 = Disable
1 = 1 minute
2 = 2 minutes
3 = 4 minutes
4 = 8 minutes
5 = 16 minutes
6 = 32 minutes
7 = 64 minutes
(default = 0)
Power Save Group
Number 1~16
Night Mode Service
group number 1~32
(default = 1)
Power Save Group
Number 1~16
Night Mode 1~8

0 = Power Cut
1 = Power Supply
(default = 1)
Up to eight digits.
Refer to the SV8100

Programming Manual
for default settings.
Level
2 3


Ecology