NEC Univerge SV8100 Features And Specifications Manual page 865

UNIVERGE SV8100
Program
Program Name
Number
84-26-01 IPL Basic Setup – IP Address
84-26-02 IPL Basic Setup – RTP Port
Number
84-26-03 IPL Basic Setup – RTCP Port
Number (RTP Port Number + 1)
Operation
Refer to the UNIVERGE SV8100 IP-DECT Customer Engineer Manual for additional information.
For specific handset information, refer to the following:
ML440 End User Guide

G266 and G566 Handsets User Guide

IP Multiline Station (SIP) – ML440/G566/G266 with AP400/AP300
Description/Comments
Assign the IP address for each
DSP on the IPLA/IPLB.
Assign the RTP port number to be
used for each DSP on the IPLA/
IPLB.
 Only even numbered ports
are supported.
Define the TCP port number for
RTCP to use for each DSP.
Assigned Data
1
xxx.xxx.xxx.xxx
Defaults:
Slot 1 = 172.16.0.20
:

Slot 4 = 172.16.0.44
VoIP GW 1~8:
172.16.0.20~
172.16.0.27
0~65534
Defaults:
VoIP GW1 = 10020
VoIP GW2 = 10052
VoIP GW3 = 10084
VoIP GW4 = 10116
VoIP GW5 = 10148
VoIP GW6 = 10180
VoIP GW7 = 10212
VoIP GW8 = 10244
0~65534
Defaults:
VoIP GW1 = 10021
VoIP GW2 = 10053
VoIP GW3 = 10085
VoIP GW4 = 10117
VoIP GW5 = 10149
VoIP GW6 = 10181
VoIP GW7 = 10213
VoIP GW8 = 10245
Issue 13.0
Level
2 3


2 - 831