NEC Univerge SV8100 Features And Specifications Manual page 962

Issue 13.0
Program
Program Name
Number
32-04-01 Door Box Name Setup – Door
Box Name
84-19-01 SIP Extension CODEC
Information Basic Setup –
Number of G.711 Audio Frames
84-19-03 SIP Extension CODEC
Information Basic Setup – G.711
Type
84-20-01 SIP Extension Basic Information
Setup – Registrar/Proxy Port
84-26-01 IPL Basic Setup – IP Address
90-23-01 Deleting Registration of IP
Telephones – Delete IP
Telephone
Operation
For additional information regarding the IP Video Doorphone, refer to the following manuals:
The UNIVERGE SV8100 IP Video Doorphone (IP3NE-IPCDH) Configuration Guide
The UNIVERGE SV8100 IP Video Doorphone (IP3NE-IPCDH) DR-Viewer Installation and Configuration Guide
2 - 928
Description/Comments
Define the name of each
Doorphone.
Define the G.711 audio frame size.

Define the G.711 Type – -law is
recommended when in USA.
Define SIP station Proxy Port.
Assign the IP address for each
DSP on the IPLA/IPLB.
When deleting the registration, the
Doorphone number in Program
15-05-46 is deleted at the same
time.
UNIVERGE SV8100
Assigned Data
1
Up to 12 characters
(default not assigned)
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
(default = 2)
0 = A-law
1 =-law
(default = 1)
1~65535
(default = 5070)
xxx.xxx.xxx.xxx
Defaults:
Slot 1 = 172.16.0.20
:

Slot 4 = 172.16.0.44
VoIP GW Number 1~8
172.16.0.20 ~
172.16.16.0.27
[Delete?] : Dial 1 +
press Transfer
IP Video Doorphone
Level
2 3




