NEC Univerge SV8100 Features And Specifications Manual page 262

Issue 13.0
Program
Program Name
Number
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DDI/
DIL/ E&M Override
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook signaling
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-35 Class of Service Options
(Supplementary Service) – Block
Camp-On
20-18-06 Service Tone Timers – Interval of
Call Waiting Tone
21-01-18 System Options for Outgoing
Calls – Reset Dial After Failure of
Trunk Access
2 - 228
Description/Comments
Turn Off or On an extension ability
to receive a second call from a
DID, DISA, DIL, or tie line caller.
With this option set to 1, the

destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
Turn Off or On an extension ability
to have calls queued if a call rings
the extension when it is busy.
Turn Off or On an extension ability
to receive off-hook signals.
Allow a busy extension ability to
Manually (0) or Automatically (1)
receive off-hook signals.
Turn Off or On an extension user
ability to block callers from dialing
#
to camp-on.
Set the time between call waiting
tones. This timer also sets the
interval between off-hook signaling
alerts.
Enable/Disable an extension user
ability to continue to dial codes or
extensions after receiving Trunk
Busy. This must be Enabled for
this feature to work.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10)
0 = Disable
1 = Enable

(default = 1)
Call Waiting/Camp-On
Level
2 3




