NEC Univerge SV8100 Features And Specifications Manual page 48

Issue 13.0
Operator Notification
To prevent Account Code abuse, the system can notify the operator each time an Account Code
violation occurs (Program: 20-13-20). This can happen if the user fails to enter an Account Code (if
Forced) or enters a Verified Account Code that is not in the list. The notification is an automatic Intercom
call to the attendant and a RESTRICT message in the operator display.
Account Codes for Incoming Calls
The system allows extension users to enter Account Codes for incoming calls. When this option is
enabled, a user can dial
their caller. If the option is disabled, any digit the user dials after answering an incoming call outdials on
the connected trunk.
Hiding Account Codes
Optionally, Account Codes can be hidden from a telephone display. This prevents, for example, an
unauthorized co-worker from obtaining a Verified Account Code by watching the display. When hidden,
the Account Code digits show as
Account Code Capacity
Account Codes print along with the other call data on the SMDR record after the call completes. Account
Codes can have 1~16 digits using 0~9 and
Redialed Numbers Do Not Contain Account Codes
When using the Last Number Redial, Save or Repeat Dial features, the system does not retain Account
Code information. For any number redialed with these features, the user must enter an Account Code.
 If a user enters 12345

as 203 926 5400 67890

Conditions
If a user enters a code that exceeds 16 digits, the system ignores the Account Code Entry.

If the system has Account Codes disabled, the digits dialed (e.g.,

SMDR report as part of the number dialed.
If using Forced Account Code with single line telephone you need a VRS to get the prompts

to enter the Forced Account Code.
When you use Forced Account Code on only toll calls, and you dial a local call, you hear a

beep.
The timer set in Program 21-01-14 is applied to toll calls and local calls.

Speed Dial – System/Group/Station bins can contain stored Account Codes. They can be

prevented from being displayed using Program 20-07-04.
2 - 14
while on an incoming call, enter an Account Code, and then dial

on the telephone display.

. Verified Account Codes can have 3~16 digits.
#
203 926 5400 67890 , if the Last Number Redial feature is used, the system dials the number
  
. The 67890 is not treated as an Account Code.
  
1234

Account Code – Forced/Verified/Unverified
UNIVERGE SV8100
to return to

) appear on the
