Figure 28 Cm 8A Lcr Development Table – Caller Id Display (Continued) - NEC Univerge SV9300 Programming Manual

Figure 28 CM 8A LCR Development Table – Caller ID Display (continued)
SIP Trunk Programming Guide
3. Click Apply.
Command Line Example:
CM 15400>15>7 (Default: Caller ID Number on Upper Line/Name on Middle Line)
1. Select station SIP Trunk LCR Pattern No. and click Read to get the
current data settings.
2. FD=176 Select 15 to follow CM 8A5xxx>186 setting.
3. FD=183 Select 00 to send calling party name.
4. FD=186 Select calling party number sending option.
5. Click Apply.
Command Line Example:
CM 8A5000>176>15
CM 8A5000>183>00
CM 8A5000>186>03
(Default: Follow CM 8Axxx>186 Setting)
(Send Calling Party Name Assigned to CM77 Y=1)
(Send Calling Party Number Assigned to CM12 YY=51)
Issue 1.0
33