NEC Univerge SV8100 Features And Specifications Manual page 104

Issue 13.0
Related Features
Call Forwarding
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-01-01 System Numbering – Service
Code
20-01-01 System Options – Operator
Access Mode
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-17-01 Operator Extension – Operator's
Extension Number
24-02-01 System Options for Transfer –
Busy Transfer
2 - 70
Description/Comments
Set the system internal (Intercom)
numbering plan. The numbering
plan assigns the first and second
digits dialed and affects the digits
an extension user must dial to
access other extensions and
features, such as service codes
and trunk codes. If the default
numbering plan does not meet the
site requirements, use this
program to tailor the system
numbering to the site.
Assign the priority of a call when
calling an operator telephone.
Turn Off or On an extension user
ability to have calls queued if a call
rings the extension when it is busy.
Define the extension numbers
which are to be used by operators.
Enable/Disable extensions to
Transfer calls to busy extensions.
If disabled, calls transferred to
busy extensions recall
immediately.
UNIVERGE SV8100
Assigned Data
1
Refer to System
Numbering Default
Settings table in the
UNIVERGE SV8100
Programming Manual
for a list of default

settings.
0 = Step

1 = Circular
(default = 0)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Up to eight digits

(default = ext. 101)
0 = Disable
1 = Enable
(default = 1)
Attendant Call Queuing
Level
2 3

