Headset Operation - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
A multiline terminal user can use a customer-provided headset in place of the handset. Like using
Handsfree, using the headset frees up the user's hands for other work. However, Headset Operation
provides privacy not available from Handsfree.
As the headset plugs in a separate jack on the bottom of the telephone, the handset can still be
connected to the telephone. This gives you the option to use the handset, headset or the speakerphone
for calls.
Conditions
While using the headset, the Headset function key becomes a release (disconnect) key and

no dial tone is heard from the speaker.
While in the headset mode, the hook switch is not functional.

The Headset Programmable Function key (05) and Headset service code (688) are not

available for the Electra Professional telephones.
An extension with a headset can receive voice-announced Intercom calls and respond

handsfree when idle.
A Headset Function key is required to answer or place a call in headset mode.

Headset Ring and Headset Off-Hook Ring (Programs 15-02-41 and 15-02-42) are not

supported for the legacy DTR/DTH style terminals.
The Electronic Headset Switch (EHS) is only supported on the ITL/DTL-8LD, ITL/DTL-12/

24 and ITL-320C terminals.
The EHS only functions with the Plantronics

headsets.
The Headset key needs to be programmed on LK 25 on the ITL/DTL-12/24 and LK 33 on

the ITL/DTL-8LD and ITL-320C terminals.
The EHS and 8LK are not supported on the same SV8100 terminal.

Ambient noise and/or conversations close to the headset microphone may trigger beeps

heard in the headset. Also, the reorder tone results in beeps heard in the headset.
When the ACD feature: Headset Operation (with Automatic Answer) is enabled, EHS is not

supported.

Headset Operation

Headset Operation
® ®
CX5xx and Savi 700 family of wireless
Issue 13.0
2 - 719