NEC Univerge SV8100 Features And Specifications Manual page 251

UNIVERGE SV8100
Program
Program Name
Number
20-13-10 Class of Service Options
(Supplementary Service) –
Barge-In Monitor
20-13-15 Class of Service Options
(Supplementary Service) –
Barge-In, Initiate
20-13-16 Class of Service Options
(Supplementary Service) –
Barge-In, Receive
20-13-17 Class of Service Options
(Supplementary Service) –
Barge-In Tone/Display (Intrusion
Tone)
20-13-32 Class of Service Options
(Supplementary Service) – Deny
Multiple Barge-Ins
20-13-45 Class of Service Options
(Supplementary Service) – MIC
Key Mode While Call Monitoring
20-14-11 Class of Service Options for
DISA/E&M – DISA/Tie Trunk
Barge-In
20-17-01 Operator Extension – Operator's
Extension Number
20-18-07 Service Tone Timers – Intrusion
Tone Repeat Time
Call Monitoring
Description/Comments
Enable the extension Barge-In for
Speech mode or Monitor mode
(i.e., Barge-In initiator).
Turn Off or On an extension user
ability to barge-in on other's calls.
Turn Off or On an extension user
ability to Barge-In at the receiving
extension (i.e., Barge-In receive).
This setting must be Enabled (1)
for the ACD Call Monitoring
Enhancement to function.
Turn Off or On the Barge-In
(Intrusion) Tone. If disabled, this
also turns off the Barge-In display
at the called extension.
Allow (1)/Deny (0) the extension
user ability to have multiple users
Barge-In to their conversation.
Set per class of service, when in
Call Monitoring Mode determines
if the monitored parties receives
the barge in alert tone when
Coaching Mode is enabled.
Enable (1)/Disable (0) a DISA or
tie trunk user from using the
Barge-In feature.
Define the extension numbers
which are to be used by operators.
Extensions defined in this program
cannot be monitored using the
Call Enhancement feature.
After a user Barges In, the system
repeats the Barge-In tone after
this time. Normally, you should
disable this time by entering 0.
(This time also affects any other
type of call interruption features,
such as Voice Mail Conversation
Recording, Voice Over, etc.)
Assigned Data
1
0 = Speech
1 = Monitor

(default = 0 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for

COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Enable
1 = Disable
(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
Up to eight digits
(default = 101)
0~64800 (seconds)
(default = 0)
Issue 13.0
Level
2 3




2 - 217