NEC Univerge SV8100 Features And Specifications Manual page 965

UNIVERGE SV8100
Encryption Feature – Requires IP/Digital Call Logging Manager or Reporter for playback.

Network Port monitoring is required for recording calls from VoIP extensions.

Peer-to-Peer is only supported in a VoIP multi-port mirroring scenario.

VoIP calls placed on hold or conference will break into two call recordings.

The data switch used to monitor traffic needs to have the monitor port capable of ingress

and egress simultaneously.
Only a single NIC is supported for the PC hosting Back Office.

A maximum of four 4-Port Digital Call Logging Units is supported.

IP/Digital Call Logging supports the G.711 CODEC only.

Licenses for the 1-Port IP Call Logging Unit (IP Tap) is embedded in the firmware.

Default Setting
None
System Availability
Terminals
NEC DT300/DT700 Series Desktop Terminals – NEC IP/Digital Call Logging
Required Component(s)
4-Port Digital Call Logging Unit

1-Port Call Logging Unit (IP Tap)

PC Hardware and Software:

Pentium 4 processor

512 Mb RAM

Microsoft .Net Framework 2.0+

Data switch with managed port capabilities

LAN connection to data switch to monitor for SIP and RTP traffic and for remote access to

stored calls.
NEC BackOffice or Recorder software

IP/Digital Call Logging
Issue 13.0
2 - 931