NEC Univerge SV8100 Features And Specifications Manual page 366

Issue 13.0
Program
Program Name
Number
35-02-12 SMDR Output Options – DID
Table Name Output
35-02-13 SMDR Output Options – CLI
Output When DID to Trunk
35-02-14 SMDR Output Options – Date
35-02-15 SMDR Output Options – CLI/DID
Number Switching
35-02-16 SMDR Output Options – Trunk
Name or Received Dialed
Number
35-02-17 SMDR Output Options – Print
Account Code or Caller Name of
Incoming Call
35-02-18 SMDR Output Options – Print
Mode for Caller Name of
Incoming Call
2 - 332
Description/Comments
Determine if the DID table name
should be displayed.
Determine if the CLI output should
be displayed for DID.
Determine whether the date
should be displayed on SMDR
reports.
This option must be set to 0 if

the trunk name is set to be
displayed in Program
35-02-03.
Determine whether or not the CLI/
DID Number Switching should be
displayed.
Determine how the SMDR should
print incoming calls on ANI/DNIS
or DID trunks. If set to (1), ANI/
DNIS trunks can print DNIS digits.
If set to (0) trunk names are
printed instead.
Determine if SMDR should print
Account Code or Caller Name of
Incoming Call.
Determine how SMDR should print
Caller Name of Incoming Call.
UNIVERGE SV8100
Assigned Data
1
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = CLI (CLIP)
1 = DID Calling
Number
2 = Caller ID Name
(default = 0)
0 = Trunk Port Name
1 = Received Dialed
Number
2 = Both
(default = 0)
0 = ACC
1 = CNAME
(default = 0)
0 = Normal
1 = Line Feed
(default = 0)
Code Restriction Override
Level
2 3






