Copying Separately-Set Originals (Job Build) - Canon Color imageRUNNER C3480 Manual

Copying Separately-Set Originals (Job Build)

For instructions on this procedure using the Regular Copy Basic Features screen,
see "Job Build," on p. 4-51.
IMPORTANT
•
The 2-Sided Original mode is available only if the optional Feeder (DADF-L1) is attached
(standard equipped for the Color imageRUNNER C3480i/C3080i).
•
You cannot change the copy settings while the machine is scanning originals in the Job
Build mode. You need to set the necessary copy settings beforehand, according to the
type of originals and the desired result.
•
If you place the originals in the feeder, remove each original from the original output area
when scanning is complete.
•
When copying, you can change or specify the following settings before scanning the next
batch of originals (i.e., between batches): the number of copies, 2-Sided Original mode,
original type, copy exposure, color mode, and copy ratio. However, if you specify the
Image Combination mode with the Job Build mode, you cannot change the original type,
copy exposure, color mode, and copy ratio.
•
If you use the Job Block Combination mode, the Job Build mode is automatically set for
each batch of originals. You cannot use the Job Build mode for the combined document.
1
Press [Scan Originals] ➞ [Job Build].
2
Press [Set].
3
Press [Done].
Scan Originals Settings
7
7-43