3
Confirm the contents of the printout ➞ scan the next original.
To rescan the image immediately after an original has scanned, replace the
original ➞ select [Re-Scan] ➞ press
If you want to change the copy settings, make the changes before pressing
(Start).
•
You can adjust the exposure and the image quality. (See "Exposure and Original
Type Settings," on p. 3-2.)
•
You can change the number of copy sets. (See "Flow of Copy Operations," on p.
1-6.)
•
You can change the copy ratio. (See "Changing the Copy (Zoom) Ratio," on p.
3-9.)
•
You can change the color mode. (See "Changing Color Modes," on p. 3-56.)
4
After all originals are scanned, press [Done].
(Start).
Scan Image Check
4
4-55