Storing Scanned Originals with Copy Settings in a User
Inbox (Store In User Inbox)
For instructions on this procedure using the Regular Copy Basic Features screen,
see "Storing Scanned Originals with Copy Settings in a User Inbox," on p. 4-112.
IMPORTANT
•
When you press
In User Inbox (Copy upon Storing) mode is not set, the job is not paused, but canceled.
•
You cannot store documents in the Memory RX Inbox or a Confidential Fax Inbox. For
instructions on storing documents in the Memory RX Inbox and Confidential Fax Inboxes,
see Chapter 6, "Sending and Receiving Documents Using the Inboxes."
1
Press [Others] ➞ [Store In User Inbox].
2
Press [Set] ➞ select the User Inbox number ➞ press [OK].
❑
If you want to name the document, press [Document Name] ➞ enter a name for
the document ➞ press [OK].
❑
If you want to make copies of the scanned originals while storing them in the
User Inbox, press [Copy upon Storing].
To store the scanned originals without copying them, press [Copy upon
Storing] to clear the check mark.
3
Press [Done].
(Stop) while copying in the Store In User Inbox mode and if the Store
Making Copies with Job Done Notice (Others)
7
7-89