7
7-20
Making a Copy With the Express Copy Basic Features Screen
IMPORTANT
•
If you want to copy an 11" x 17" original with an image that extends all the way to
the edges without the periphery of the original being cut off, load the stack bypass
with 12 5/8" x 17 11/16" or 12" x 18" paper, or load a paper drawer with 12" x 18"
paper. (See Chapter 2, "Basic Operations," in the Reference Guide and "Slightly
Reducing Images to Prevent the Original Periphery from Being Trimmed (Entire
Image)," on p. 7-15.)
•
The following types of originals cannot be copied by using Automatic Paper
Selection. Copy these using Manual Paper Selection:
- Non-Standard sized originals
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
- STMT, STMTR or smaller originals (however, STMT originals can be detected
when placed in the feeder)
● If you select stack bypass settings:
❑
Press [All].
❑
Press [Stack Bypass Settings].
❑
Select the paper size ➞ press [Next].
IMPORTANT
•
If you select a nonstandard size paper, the Poster, Rotate Collate, Rotate Group,
Offset Collate, Offset Group, Staple, Hole Punch, 1 2-Sided, 2 2-Sided,
Book 2-Sided, 2-Page Separation, Cover/Sheet Insertion, Image Combination,
Booklet, Transparency Interleaving, Job Block Combination, or Store In User Inbox
mode cannot be specified.
•
If the envelope type is not set correctly, a paper jam will occur.
•
If you use envelopes that have glue attached to their flaps, the glue may melt due to
the heat and pressure of the fixing unit.
•
If you select [Envelope], the Poster, Finishing, 1 2-Sided, 2 2-Sided,
Book 2-Sided, 2-Page Separation, Cover/Sheet Insertion, Booklet, Transparency
Interleaving, Image Combination, Form Composition, or Job Block Combination
mode cannot be specified.