IMPORTANT
•
You can use the Memory RX Inbox function for receiving and storing fax documents only
if the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is installed.
•
If you want to use Memory Lock, you must first set Use Fax Memory Lock and Use I-Fax
Memory Lock to 'On' in Memory RX Inbox Settings. To access the Memory RX Inbox
Settings screen, press
[Communications Settings]. (See Chapter 11, "System Manager Settings," in the
Sending and Facsimile Guide.)
Receiving Documents through Fax or I-Fax
1
Set Memory Lock to 'On' from the Additional Functions
screen.
NOTE
•
For instructions on setting the I-Fax Memory Lock and Fax Memory Lock modes,
see Chapter 11, "System Manager Settings," in the Sending and Facsimile Guide.
•
The following messages are displayed while Memory Lock is being set to 'On':
- <I-Fax Memory RX is on.>:I-Fax documents will be received in memory
- <Fax Memory RX is on.>:Fax documents will be received in memory
2
The machine is now ready to receive documents in memory.
NOTE
The message <Check the Memory RX doc.> is displayed when a document is
received in the Memory RX Inbox:
Settings for Receiving Documents in Memory
You can use the Memory Lock mode outside of the preset Memory Lock start and
end times.
IMPORTANT
If you want to use Memory Lock, you must first set Use Fax Memory Lock and Use I-Fax
Memory Lock to 'On' in Memory RX Inbox Settings. To access the Memory RX Inbox
Settings screen, press
[Communications Settings]. (See Chapter 11, "System Manager Settings," in the
Sending and Facsimile Guide.)
(Additional Functions) ➞ [System Settings] ➞
(Additional Functions) ➞ [System Settings] ➞
6-3
Memory RX Inbox
6