2
Place your originals.
NOTE
•
For instructions on placing your originals, see Chapter 2, "Basic Operations," in the
Reference Guide.
•
If Auto Collate in Copy Settings (from the Additional Functions screen) is set to
'On', the Collate or the Offset Collate mode is automatically set when you place
your originals in the feeder. (See "Auto Collate," on p. 8-9.)
3
Gently close the feeder/platen cover.
The paper size is recognized automatically. If the paper size recognized
automatically is different from the paper size you want, press [Paper Select] ➞
select the copy paper size. (See "Paper Selection," on p. 1-12.)
Flow of Copy Operations
1
1-7