Changing Color Modes - Canon Color imageRUNNER C3480 Manual
Copying and mail box guide
Hide thumbs
Also See for Color imageRUNNER C3480:
- Sending and facsimile manual sending and facsimile manual (476 pages) ,
- Easy operation manual (92 pages) ,
- Service manual (53 pages)
Table of Contents
Advertisement
Changing Color Modes
This machine comes with the Automatic Color Selection mode, which recognizes
whether an original is in color or black-and-white, and then automatically switches
between the Full Color mode and Black mode. You can also manually switch
between the Full, Black, Single Color, and Two Colors modes whenever necessary.
3
IMPORTANT
For information on the modes which cannot be set in combination with this mode, see
"Combination of Functions Chart," on p. 9-6.
NOTE
•
If color printing is performed after black printing, a message may appear indicating the
machine is preparing for color printing. Please wait for a moment until the message
disappears. Color printing will start when the message disappears.
•
If you select [Retro Photo Image] in the One Touch Color mode, the color mode is
automatically set to 'Single Color'.
•
The default setting is 'Auto-Color Select' for all the Copy, Scan, and Print functions.
•
You can store the color mode as Standard Settings (from the Additional Functions
screen). (See "Changing the Current Standard Settings," on p. 8-10.)
•
You can set to display a shortcut key for the Black mode next to the color selection
drop-down list on the Copy Basic Features screen, Scan screen, and Print screen. (See
Chapter 4, "Customizing Settings," in the Reference Guide.)
■ Auto-Color Select
If the Auto-Color Select mode is selected, the machine automatically recognizes whether
the original is in color or black-and-white. Color originals are copied/scanned/printed in
the Full Color mode, while black-and-white originals are copied/scanned/printed in the
Black mode.
IMPORTANT
When the Auto-Color Select mode is set and your originals contain color sections, the
machine scans them in the Full Color mode. However, the machine may scan the color
originals in the Black mode under the following conditions. To avoid this, set the color
mode to 'Full Color'.
- If the originals contain a few color sections
- If the color sections are located on the left side (within 3/8" (10 mm) from the left edge)
- If the color sections of the originals are close to black
- If the originals contain light color densities
3-56
Changing Color Modes
of the originals when loading the originals in the feeder
Hide quick links:
Advertisement
Table of Contents
