Different Size Originals - Canon Color imageRUNNER C3480 Manual

Different Size Originals

This mode enables you to copy (scan) different size originals with the same widths
(11" x 17" and LTR, or LTRR and STMT, etc.) or different widths (11" x 17" and LGL,
or LTR and LGL, etc.), together as one group by setting them in the feeder.
IMPORTANT
•
For information on the modes which cannot be set in combination with this mode, see
"Combination of Functions Chart," on p. 9-6.
•
If the originals are placed in the feeder, make sure that the different size originals are of
the same weight (paper type).
•
Align the top edge of the originals with the back edge of the feeder if you are placing
originals with different widths.
•
Set different size originals with different widths in the following combinations. Other
combinations may damage the originals.
- 11" x 17" and LGL, LTR and LGL, LTR and LTRR
•
If you place originals with different widths in the feeder, the originals may move slightly
when fed to the platen glass. As a result, the images may be scanned and copied as
slanted.
•
If the Different Size Originals mode is set, the scanning speed may be slower than
normal.
•
Stapling cannot be performed if you place originals with different widths.
•
When storing a document in an inbox, if Document Size Select is set to anything but
'Auto', all of the originals are scanned in the specified size. If you want to scan the
originals in their original sizes, make sure to set Document Size Select to 'Auto'.
NOTE
When copying, if the Different Size Originals mode is used with the 1 2-Sided mode, the
copies are output as one-sided copies on paper of their respective sizes if the originals
for the front and back sides of a two-sided copy are different in size.

Different Size Originals

4
4-49